Clear Adhesive Film Company is a granite protection film factory of granite countertop protection film for polished granite, granite benchtops, quartz, and engineered stone surfaces. This category is made for temporary PE adhesive films used after cutting, edge polishing, surface inspection, transport, cabinet installation, kitchen renovation, and commercial countertop handover. Film thickness, tack level, roll width, color, length, and printing can be adjusted around countertop depth, gloss level, handling route, and expected protection time.

Product Information

  • Material: PE temporary film with removable acrylic adhesive
  • Thickness: 50-80 um for handling, transport, and installation protection
  • Colors: Clear, blue, white, or custom printed film
  • Tack level: Low tack, medium tack, or tested medium-high tack
  • Custom items: Width, length, thickness, color, adhesive level, printing, winding
  • Supply format: Bulk rolls for stone workshops, installers, contractors, and distributors

Showing the single result

This category is built around hard polished countertop protection, not general floor, wall, glass, or metal panel covering. Granite and engineered stone are strong, but the polished face can still pick up marks from stone dust, grit, cardboard friction, tool movement, truck vibration, and repeated lifting during installation. A properly selected protective film for granite helps keep the visible surface cleaner from the workshop to the final site handover.

The film is normally applied after polishing, cleaning, and inspection, then removed after transport, cabinet fitting, backsplash work, kitchen renovation, or final cleaning. It is a temporary working protection layer, not a permanent stone coating. For that reason, surface condition, dwell time, temperature, and removal timing should be checked before bulk use.

Product Range / Covered Products

The range includes clear granite countertop protection film for surface inspection, blue film for jobsite visibility, low tack film for short-term polished surface protection, and medium tack film for transport or installation stages. Clear film helps installers check granite color, veining, seams, edge finish, and visible defects before handover. Blue film is useful when the protected countertop must be easy to notice around plumbers, electricians, cabinet installers, and other trades.

For markets using the term benchtop, Clear Adhesive Film Company also supplies granite benchtop protection film for kitchens, hotels, apartments, retail counters, and commercial fit-out work. As a granite benchtop protection film supplier, the factory can make roll formats for countertop depth, sink cutout areas, island tops, exposed front edges, and repeat installation routes. Adhesive film for granite can also be adjusted for quartz and engineered stone after sample testing.

Selection Guide

Film selection should start with the countertop finish, expected handling pressure, and how long the film will stay on the surface. Low tack film is usually suitable for glossy granite, quartz, and engineered stone when short-term protection and visual inspection are important. Medium tack film is more practical for transport, warehouse staging, cabinet installation, and renovation sites where edges may lift because of dust, movement, or repeated contact.

Medium-high tack should be selected carefully. It may help when countertops are moved over longer routes or handled more frequently, but it is not a universal choice for every polished surface. Before bulk use, test the film on a hidden area for 24-72 h, especially on sealed granite, dark polished stone, glossy quartz, coated benchtops, or warm transport routes. For repeat projects, a small 180-degree peel check on sample surfaces can help compare removal force before production.

Benefits

  • Helps reduce temporary scratches from dust, grit, tool placement, cardboard friction, and light site contact
  • Protects polished countertop surfaces during fabrication, loading, truck transport, cabinet fitting, and final cleaning
  • Clear film allows inspection of granite color, veining, seam position, sink cutouts, and edge quality
  • Blue film makes protected countertops more visible in busy renovation or installation areas
  • Removable adhesive supports cleaner removal when tack level, dwell time, and surface condition are tested correctly
  • Bulk rolls and custom slitting help stone workshops keep protection methods consistent across repeat projects

When should granite countertop protection film be applied during a project?

Granite countertop protection film works best after the countertop has been polished, inspected, and cleaned, but before transport, cabinet installation, or final site work begins. For countertop fabricators, applying film before loading can reduce friction marks caused by stacking, lifting, and truck vibration. For cabinet and renovation teams, the film can stay on exposed working areas while sinks, appliances, lighting, backsplash, and hardware are installed nearby. It should be pressed onto a dry, dust-free surface, with extra care around sink cutouts, exposed edges, island corners, and tool-contact zones.

TDS / Technical Range

Item

Typical Range / Customizable Value

Product Category

Temporary PE protection film for granite countertop, granite benchtop, quartz, and engineered stone surfaces

Base Film

LDPE, LLDPE, or blended PE film for flexible countertop surface coverage

Thickness Range

50-80 um, heavier film available for transport and installation handling

Adhesive Type

Removable acrylic adhesive, water-based adhesive option available after surface test

Tack Level

Low tack, medium tack, or medium-high tack based on polish, dwell time, and removal requirement

Roll Width

300-1220 mm, custom width for countertop depth, edge wrap, sink cutout area, or benchtop coverage

Roll Length

50-300 m per roll, project roll length can be adjusted for bulk supply

Applications

  • Granite countertop fabrication after cutting, edge polishing, cleaning, and final inspection
  • Granite benchtop protection during loading, truck transport, unloading, and jobsite handling
  • Quartz and engineered stone counters used in kitchen, apartment, hotel, and retail projects
  • Cabinet installation where screws, sealant, hardware, tools, and packaging may contact the top
  • Kitchen renovation work involving backsplash, sink, lighting, appliances, dust, and paint touch-up
  • Commercial countertop projects in restaurants, reception areas, office counters, and retail fit-outs

Customization Options

Clear Adhesive Film Company can adjust film structure around real countertop production and installation routines. Useful details include surface type, gloss level, countertop depth, exposed edge design, expected protection time, transport route, site temperature, and whether clear inspection or blue warning visibility is preferred. With these details, the factory can recommend thickness, tack level, adhesive type, roll width, roll length, color, printing, and winding direction.

How should tack level be selected for polished granite, quartz, and engineered stone?

Tack level should be selected by surface finish, dwell time, handling pressure, and removal expectations. Low tack film is usually safer for short-term protection on polished granite or engineered stone when the surface must be checked visually before handover. Medium tack film gives stronger holding power for transport, cabinet installation, and busy renovation sites where film edges may lift. Medium-high tack can be considered for heavier handling or longer movement routes, but it should not be treated as universal for every polished countertop. A hidden-area test for 24-72 h is recommended before bulk use.

FAQ

Can protective film for granite be used on quartz countertops?

Yes. It can be used on many quartz and engineered stone countertops, but surface finish, coating, dwell time, and removal condition should be tested first. A short hidden-area test helps confirm whether the selected adhesive level is suitable.

Will the film leave adhesive residue after removal?

The film is designed for temporary removable protection, but clean removal depends on the surface, tack level, temperature, and how long the film stays applied. Testing samples before bulk use is the safest method, especially on polished or coated surfaces.

Is clear or blue film better for granite countertop projects?

Clear film is better when installers need to see color, veining, seams, sink cutouts, or edge quality before handover. Blue film is better for busy renovation or cabinet installation sites because it makes the protected countertop more visible.

What information should be provided before bulk production?

Useful details include countertop material, polish level, target thickness, roll width, roll length, color, printing needs, application stage, expected dwell time, transport condition, and removal requirement. These details help the factory recommend a practical film structure.