Clear Adhesive Film Company is a surface protection film manufacturer producing temporary protection films for construction, renovation, painting, installation, and moving sites. This category covers jobsite protection for hard surfaces, soft areas, windows, walls, doors, counters, stairs, fixtures, and traffic paths. As a China surface protection film supplier, we help contractors, installers, distributors, and renovation teams confirm structure, tack, roll size, protection period, and sample testing before bulk production.
Showing all 8 results
Finished surfaces are often exposed before a construction or renovation project is complete. Drywall dust, shoe grit, ladder feet, carts, paint splash, furniture movement, and repeated access can leave marks before handover. This category is for temporary jobsite surface protection, not general packaging film.
When window glass, mirrors, or glass doors are the most sensitive surfaces on site, use the temporary glass protection film solution to plan testing, edge control, and removal timing.
A surface protection film roll should be planned before the site becomes crowded. Entry lanes, stairs, frames, windows, walls, counters, fixtures, and new floors often need protection first. If dust or grit is trapped under the film, foot traffic may press particles into the finish. For sensitive surfaces, test a clean dry area and check peel behavior after 24 hours, 72 hours, and 7 days. For thickness, tack, residue control and removal checks, review the polyethylene protective film technical data before selecting a construction protection film grade. When the PE backing also needs controlled friction for extrusion, winding, coating, or converting, review how slip agents affect COF and surface migration in polyethylene film before approving the base-film formulation.
Start with the work stage. Early renovation needs dust control and traffic path coverage. Painting requires splash resistance, edge stability, and clean removal. Installation and moving work need resistance against tools, carts, boxes, ladders, and foot traffic.
Surface condition comes next. Smooth or sensitive finishes usually need low tack film and short testing. General hard surfaces often work with medium tack film. When sourcing from a hard surface protection film factory, do not choose the highest adhesion automatically. Wrong tack may cause residue, ghosting, edge curling, or difficult removal. Low tack film may lift in busy paths, while high tack film may be too aggressive for delicate finishes.
When protection begins during finishing or fabrication and continues through storage, transport, or installation, review surface protection film uses in industrial production.
For soft carpeted areas, surface matching should be handled more carefully; review carpet film residue and removal checks before applying self adhesive carpet film on project walkways.
Protect areas finished early and touched often. Entry paths, stairs, floors, carpets, windows, doors, walls, countertops, and fixtures face constant contact from workers, carts, tools, dust, and moving materials. Separate hard surfaces from soft surfaces, then match each area with the right film, roll width, adhesion, and removal time. Detailed carpet, granite, marble, glass, and wall protection can stay under dedicated subcategories.
Item | Typical Range / Customizable Value |
Film material | PE, co-extruded PE, PVC-free structure, removable adhesive options |
Thickness range | 30 um - 150 um, selected by traffic level, surface type, and protection period |
Roll width | 50 mm - 1600 mm, custom slit width for corridors, stairs, doors, frames, and paths |
Roll length | 30 m - 1500 m finished rolls, jumbo rolls for converters, distributors, and project stock |
Adhesion level | Low tack, medium tack, high tack, tested by surface finish, traffic level, and removal timing |
Color and printing | Clear, blue, white, black, warning text, removal instruction, project marking, private label |
Perforation and winding | Custom tear-off interval, normal wound, reverse wound, applicator-friendly roll |
Testing and supply | Clean dry surface test after 24 hours, 72 hours, and 7 days, finished roll, slit roll, jumbo roll |
For construction, renovation, glass, countertop, wall, carpet, and jobsite surface protection, this surface protection film application testing guide helps confirm cleaning method, dwell time, edge contact, and removal condition before wider use.
For smooth or sensitive finishes where lighter adhesion may be required, review the low tack protective film selection and testing guide to confirm surface condition, dwell time, edge contact, peel behavior, and removal risk before wider use.
Clear Adhesive Film Company adjusts roll specifications around real jobsite use. Narrow slit rolls suit stairs, frames, edges, door lines, and window borders; wider rolls suit corridors, rooms, elevators, and open floors. Printed warnings or removal reminders help crews apply and remove the film correctly. Perforation can reduce knife use on finished surfaces. Before production, confirm surface type, coating condition, job duration, width, thickness, tack, winding, label content, exposure, and sample testing needs. If the film will face direct sunlight, rain, heat, or outdoor storage, use our polyethylene outdoor-use qualification guide to check exposure conditions, dwell time, adhesive behavior, and removal before approval.
For custom roll width, film thickness, adhesion level, printing, or perforation requirements, review our custom surface protection film manufacturing capabilities before confirming the final specification.
Adhesion should match surface finish, traffic level, protection time, and removal condition. Low tack film is safer for smooth, delicate, newly finished, or short-term surfaces. Medium tack film fits many hard surface protection jobs during renovation, painting, and installation. High tack may help rougher or high-traffic paths, but it is not always better. Testing after 24 hours, 72 hours, and 7 days helps prevent residue, ghosting, edge lift, or difficult removal.
It protects finished surfaces from dust, scratches, foot traffic, paint splash, tool marks, moving friction, and jobsite dirt.
Choose by surface type, traffic level, protection period, adhesion, removal timing, finish, and exposure.
Yes. Width, length, thickness, color, printing, perforation, tack, winding, slit roll, jumbo roll, labels, and warning text can be customized.
Residue risk can be reduced by matching tack, applying on a clean dry surface, avoiding overlong exposure, checking temperature and dust, and testing before bulk use.
