Clear Adhesive Film Company manufactures PE Protective Film For Plastic Sheet for acrylic, PMMA, PC, PVC, rigid PVC, and foamed PVC sheet or board processing. Designed as PE surface protective film for plastic sheet applications, it protects surfaces during lamination, cutting, drilling, CNC routing, laser engraving, thermoforming, stacking, and pallet transport. The film is selected for clean peel removal, haze control, holding force, edge stability, and controlled adhesion on different plastic board surfaces.
Showing all 2 results
PE Protective Film For Plastic Sheet is used before, during, and after plastic sheet processing. It helps extrusion plants, board distributors, CNC workshops, display converters, thermoforming factories, and panel fabricators protect finished surfaces while sheets are laminated, machined, stored, or delivered.
Acrylic and PMMA are used for clear display panels and advertising sheets, so haze, fogging, adhesive imprint, adhesive transfer, and residue must be checked after dwell time. PC sheet is drilled, sawed, bent, or CNC routed, so weak adhesion can cause film lift. Rigid PVC and foamed PVC may have matte texture, cutting dust, or routed edges, so medium or higher tack is often safer during stacking and transport.
This category covers acrylic, PMMA, PC, PVC, rigid PVC, and foamed PVC sheet or board protection, including protective film on acrylic, protective film for PMMA sheet, PC sheet protective film, and foamed PVC board protective film for different lamination and machining routes. A scratch resistant film for acrylic must balance scratch control with clean removal, while PC, PVC, and foamed PVC grades focus more on holding force and edge contact.
Product Series | Covered Sheet / Board | Recommended Focus |
Clear Acrylic Series | Glossy acrylic sheet | Haze control, clean peel |
PMMA Appearance Series | Clear PMMA sheet | Fogging review, residue check |
PC Processing Series | Polycarbonate sheet | Holding force during drilling and routing |
Rigid PVC Series | Smooth or matte rigid PVC sheet | Medium tack, edge lifting control |
Foamed PVC Board Series | Foamed PVC board | Contact stability after sawing |
Lamination Roll Series | Extrusion-line or sheet lamination | Roll flatness, winding direction, width matching |
Select plastic sheet protective film by material, finish, process, storage time, and removal condition. If an incoming specification uses the broad term “polyolefin film,” confirm whether it means PE, PP, a blend, or a commercial POF structure before matching tack and thickness; the difference between polyethylene films and polyolefin explains this terminology and specification check. Low tack may suit high-gloss PMMA, but it can lift on routed foamed PVC. Higher tack may hold on PVC board, but it can mark transparent acrylic if dwell time, storage temperature, or adhesive level is not controlled.
For extrusion-line lamination, check roll flatness, web tension, sheet cooling, contact pressure, and winding direction. For sheet lamination, check dust control, roller pressure, sheet flatness, and trapped air. Before production, test actual sheets for 180-degree peel force, dwell-time behavior, haze, residue, tack growth, and edge lifting. If the project team is also comparing PE protection film with PET processing film, this PE vs PET film comparison for plastic sheet protection explains when flexible removable PE film is more suitable.
Material / Adhesive Selection Comparison | Surface Character | Suggested Adhesion | Main Risk to Check |
Acrylic sheet | Glossy, transparent | Low to medium tack | Haze, fogging, adhesive shadow |
PMMA sheet | High clarity, smooth | Low to medium tack | Residue, visible peel marks |
PC sheet | Tough, machined | Medium tack | Film lift during drilling or routing |
Rigid PVC sheet | Smooth or matte | Medium tack | Edge lifting after cutting |
Foamed PVC board | Routing dust, lower density | Medium to higher tack | Poor contact and lifted edges |
Mixed board runs | Different sheet types | Test by material group | Wrong grade across surfaces |
For projects involving acrylic, PMMA, PC, PVC, rigid PVC, or foamed PVC sheet processing, this surface protection film application guide explains how to check adhesion level, edge lifting, residue risk, and removal timing before full use.
PE protective film should be rechecked whenever sheet grade, finish, lamination method, machining route, or storage period changes. A film approved on glossy acrylic may not behave the same on PMMA, PC, rigid PVC, or foamed PVC board. Before approving a film across lamination, machining, stacking, transport, and removal, use the guide to surface protection testing through industrial production.
For extrusion-line lamination, confirm roll flatness, winding direction, web tension, and contact pressure after the sheet cools enough for stable contact. For sheet lamination, check dust, trapped air, and handling. PC needs holding-force review after machining, while PVC and foamed PVC need lifted-edge review after cutting and transport.
Item | Typical Range / Customizable Value |
Product category | PE Protective Film For Plastic Sheet |
Film material | PE base film |
Adhesive system | Removable acrylic adhesive, low / medium / higher tack |
Thickness range | 30-100 um |
Width range | 20-2200 mm |
Slitting tolerance | +/-1 mm for most slit rolls |
Suitable surfaces | Acrylic, PMMA, PC, PVC, rigid PVC, foamed PVC sheet/board |
Color options | Clear, blue, white, black-white, custom color |
Lamination method | Extrusion-line lamination, sheet lamination, manual or semi-auto lamination |
Processing compatibility | Cutting, sawing, drilling, CNC routing, laser engraving, thermoforming, bending |
Roll format | Custom roll length, core size, winding direction, slit roll supply |
Test reference | 180-degree peel check, dwell-time review, edge lifting observation |
Appearance check | Haze, fogging, adhesive imprint, residue inspection |
Storage condition | 15-30 C, clean, dry, away from heat and direct sunlight |
Repeat-order control | Retained sample, tack record, width and winding confirmation |
Clear Adhesive Film Company adjusts film grade by sheet type, gloss, process, removal window, and transport condition. Options include 30-100 um thickness, 20-2200 mm width, low to higher tack, clear or colored film, printing, core size, roll length, winding direction, and slit roll format.
For repeat orders, confirm sheet material, surface finish, lamination method, machining steps, storage period, removal condition, and whether the film remains on the sheet during pallet transport. Retained samples help keep tack level, winding tension, roll flatness, and slitting tolerance consistent across later production runs.
Select adhesion by sheet behavior, not film thickness alone. Clear acrylic and PMMA usually need low to medium tack because glossy surfaces show haze, fogging, adhesive shadow, transfer, and residue more easily. PC often needs medium tack for drilling, sawing, routing, and bending. Rigid PVC and foamed PVC may need medium to higher tack because cutting dust, matte texture, and routed edges reduce contact stability. Before batch use, test actual sheets and review peel force, edge lifting, dwell-time behavior, tack growth, and residue after removal.
One grade may cover similar surfaces, but it should not be approved for all plastic sheets without testing. Acrylic and PMMA focus on appearance, while PC and PVC may need stronger holding.
Use low or medium tack, avoid long heat exposure, and test actual acrylic sheet. Haze, fogging, adhesive imprint, transfer, and residue should be reviewed after dwell time.
PC sheet usually needs stable holding force during CNC routing, drilling, and sawing. Medium tack is often safer than very low tack when vibration or clamping is involved.
Confirm film grade, sheet material, surface finish, thickness, width, slitting tolerance, tack level, winding direction, roll flatness, storage condition, 180-degree peel result, edge lifting, and removal appearance.
