Protective Film For PVC Sheet

Clear Adhesive Film Company is a manufacturer of protective film for pvc sheet for temporary surface protection during extrusion line lamination, stacking, cutting, handling, and transport. Made with PE backing and pressure-sensitive adhesive, this self adhesive PE protective film helps PVC sheet, rigid PVC board, and foamed PVC board reduce scratches, dust pressure marks, and workshop stains. In 24-72 hours sample checks or short transport simulation, it is designed to peel cleanly with low risk of glue marks, torn pieces, or visible haze.

Product Overview

PVC board production needs a film that follows the sheet through real factory movement. After cooling and thickness control on the extrusion line, the roll should unwind evenly, sit flat on the board, and keep position while the line continues to run. Unbalanced tension may cause wrinkles, drift, or exposed edges that become marked during trimming, stacking, pallet movement, or delivery handling.

This PVC sheet protective film is made for short-term process protection before the surface is exposed. Smooth rigid PVC board usually works with low to medium tack. Foamed PVC board often needs higher adhesion because its surface can be softer during cross-cutting and movement. Tack level is matched to board finish, thickness, storage time, peeling angle, and clean removal requirement.

Typical checks include 24-72 hours edge-lifting observation, cutting-edge hold after trimming, and clean removal review after stacked-board transport simulation. On smooth rigid PVC sheet, reference peel adhesion is around 80-180 g/25 mm. On foamed PVC board, 120-260 g/25 mm may be selected after sample testing.

Benefits

• Helps reduce scratches, dust marks, and handling stains before finished boards reach final use.
• Runs smoothly on extrusion-line lamination with stable unwinding and balanced roll tension.
• Offers tack options for rigid PVC board protective film and foamed PVC board protection film needs.
• Holds the board surface during trimming, cross-cutting, edge processing, stacking, and pallet movement.
• Supports 24-72 hours peel checks to reduce glue marks, haze, lifting, and torn film fragments.
• Available in adjusted thickness, width, length, color, printing, adhesion level, and slit-roll tolerance.

When should clean-removal performance be tested before stacking and transport?

Clean removal should be checked before regular production, not only after finished boards arrive at the next process. A practical method is to laminate sample PVC sheet from the extrusion line, stack boards under normal workshop pressure, trim several edges, and peel the film after 24-72 hours at a steady angle. The clean removal protective film should come off in one piece without obvious glue marks, haze, torn fragments, or surface disturbance.

TDS

Applications

• Extrusion-line lamination for PVC sheet after cooling and thickness control.
• Surface protection for rigid PVC board before trimming, stacking, and transport.
• Foamed PVC board protection for sign board, display board, cabinet board, and panel processing.
• Board stacking protection where sheet-to-sheet friction may create fine surface marks.
• Workshop cutting, cross-cutting, and edge handling where temporary surface coverage is needed.
• Transport protection for finished PVC boards before peeling, inspection, and final use.

How does extrusion-line lamination affect film selection for PVC sheet?

Film used on a PVC sheet extrusion line must do more than provide surface tack. The roll needs steady unwinding, controlled tension, and smooth contact with the cooled board surface. If the film stretches, wrinkles, drifts, or lifts at the edge, the board can still be marked during downstream cutting, stacking, or pallet movement. A suitable temporary surface protection film should run consistently through roller lamination and stay attached until transport is finished.

production line

loading containers

FAQ

What adhesion level is suitable for rigid PVC board?

Smooth rigid PVC board usually works with low to medium tack. Test first because gloss, additives, storage time, and peeling angle can affect removal behavior.

Can this film be used on foamed PVC board?

Yes. Foamed PVC board often needs slightly stronger adhesion than smooth PVC sheet during stacking, cutting, edge handling, and pallet transport.

Will the film leave glue after removal?

The film is designed for clean removal. Peel testing after 24-72 hours on the actual board surface is recommended.

Can the roll size match extrusion-line lamination?

Yes. Thickness, width, length, color, printing, and adhesion level can match lamination speed, cutting width, unwind tension, and handling conditions.