Clear Adhesive Film Company is a China manufacturer of china marble countertop protection film for natural marble countertops during installation and handover. This range is made for polished marble, honed marble, and sealed marble samples that need low-tack removable PE film, cleaner peeling, dust isolation, and light protection. For sensitive marble, sample testing matters more than heavy-duty stone handling performance.
Showing the single result
This marble countertop protection film range supports countertop fabricators, installers, renovation contractors working with natural marble rather than general hard-stone surfaces. Marble can be sensitive when polished, honed, lightly sealed, dusty, newly installed, or cleaned with unknown chemicals. This category is built around controlled tack, smooth unwind, clean handling, and sample approval.
The film helps reduce contact with renovation dust, light water spots, tools, marks, and jobsite contamination during countertop work. It is not a stone sealer, acid-resistant coating, or long-term anti-stain treatment. Selection should consider finish, tack level, removal period, temperature, cleaning condition, and sealer status.
As a marble protection film supplier, Clear Adhesive Film Company supplies rolls for countertop fabrication, vanity installation, kitchen renovation, project covering, and wholesale distribution. Clear low-tack film keeps marble visible for inspection. Light blue film improves visibility on active sites. Short slit rolls suit installers, while 50-1000 m factory rolls suit repeated production.
For customers sourcing china marble protection film in bulk, covered products include clear PE rolls, light blue rolls, printed rolls, narrow rolls for edge zones, wide countertop rolls, and wholesale rolls. Custom slit widths reduce waste on islands, vanity tops, backsplashes, and narrow strips.
When choosing marble surface protection film, confirm the finish before thickness or roll size. For polished marble, start with lower tack and test removal after 24-72 hours. Glossy marble can show haze, drag marks, peel marks, or adhesive stress more clearly, so final appearance should be checked. For honed marble, the surface may hold dust, moisture, or stone powder, so it must be clean and dry.
For sealed marble, test on the same sealer condition because fresh and older sealed surfaces may respond differently. Avoid using high-tack granite protection film directly on marble. Also avoid application on wet, dusty, newly treated, or unknown marble without testing.
Before bulk use, test the film on a spare sample, edge area, or hidden corner of the same marble finish. Natural marble can vary by sealing condition, polishing level, moisture, porosity, and surface dust. Check initial tack, film flatness, edge lifting, 180-degree peel feel, residue, and visible haze after removal. Polished marble needs closer appearance checking; honed marble needs closer residue and dust-pickup checking.
Item | Typical Range / Customizable Value |
Base film | PE removable protection film for marble countertop surfaces |
Adhesive type | Low-tack acrylic adhesive, water-based option available |
Film thickness | 30-100 um typical, custom range by project testing |
Width range | 300-2200 mm, custom slit rolls, width tolerance +/-2 mm |
Roll length | 50-1000 m common supply, longer rolls by factory arrangement |
Adhesion reference | Low tack to medium-low tack, tested by 180-degree peel method |
Surface compatibility | Polished marble, honed marble, sealed marble sample surfaces |
Suggested trial time | 24-72 hours sample check before bulk use |
Test items | Initial tack, edge lifting, residue, haze, peel stability |
Clear Adhesive Film Company can adjust the surface protection film for marble according to finish, protection time, roll size, adhesive level, and batch supply requirements. Custom parameters include thickness, width, length, adhesive grade, color, printed logo, label, carton mark, and roll core. For production matching, provide finish type, sealer condition, use period, temperature, roll size, and sample feedback.
For bulk supply, price and thickness are only part of the discussion. The factory also needs to know whether the film will face heat, sunlight, moisture, fresh sealers, stone powder, or frequent worker contact. These details help adjust tack level, roll tension, slitting width, and packing format.
Polished marble and honed marble need different protection choices. Polished marble has a reflective finish where light scratches, adhesive haze, or peel marks are easier to notice, so lower tack and a shorter tested period are usually preferred. Honed marble has a matte appearance, but its more open surface can hold dust or residue if it is not clean. A practical supply range should provide low-tack options, controlled unwind, custom widths, and sample-based selection.
Clean removal depends on finish, tack level, cleanliness, temperature, and protection time. Sample testing is recommended.
Yes. Use low-tack removable film after edge testing, with shorter protection time and gentle removal.
Yes, but honed marble should be clean and dry because matte surfaces may hold dust or residue.
No. It is a removable covering for installation, renovation, and delivery stages, not a long-term sealer or anti-acid treatment.
